placer (5)

Crazycrusher Impact Mill finally finished!

I finally completed the long awaited Crazycrusher Impact Mill. Finding the time to develop it was the main issue. This unit is the 2nd prototype. The first was just a mock up to test the functionality of it, and then went ahead with the perceived changes and built this second unit.

Now comes the task of finding the time to take it out and do test runs. Capacity needs to calculated, like how much it can handle (based in tonnage or yardage per hour). Looking for any “weak” spots that would need to be re-designed and implemented in to the 3rd unit, which will be the marketable unit... if it is taken to market at all. If not, at least I will have a nice impact mill to crush viable ores from old tailing piles.

But of course, I'll use the hand operated Crazycrusher for testing those piles. Since the Impact Mill weighs in at 120 pounds, (Mill, Stand and Engine) I don't see the need to haul it out in the field to do sampling, that's what the Hand Operated model is for... for “Prospecting”. The Impact Mill is for “Mining” production of ores, albeit on a small scale.

I'm excited with the features implemented in the design, and came with a lot of pre-thought of what “I” would want in a 14” impact mill with a 4” feed, easy open door, bottom output, easy change hammers, and more. I want the output powder to run directly in to the top of the Gold Cube. Crush a ton, take home a cup of cons!

Hopefully, if we go to market with it, it could be as early as this springtime!

Happy Crushing!

Read more…

The Art of Prospecting

The Art of Prospecting.

This post is NOT going to tell you “how” to find gold, or what to look for, etc., but more so the finer details that some people may overlook or dismiss.

Gold itself will be again on the rise. Not to get all political and all, but the truth is it is politics that drives the price of gold up. You have the Obama Administration going to town with the Nations' credit cards, spending unheard of TRILLIONS, with the blessings of the House of Representatives who holds the very loose purse strings. You have the Private Federal Reserve doing Quantitative Easing (QE) and pumps billions in to the economy which only dilutes the money and devalues it, making the price of everything taking more “dollars” to purchase items. You have the shaky and uncertain Market where investors are cashing in stocks and bonds for gold.

Gold prices doubled in the first 4 years of the Obama administration, and perhaps will double again to $3,200. Time will tell. And then there is the matter of “Fractional Banking” practices, you know, selling each ounce of gold about 8 times, to 8 different buyers. What happens when those 8 people want their gold, or to even “see” the gold? When they realize they had been duped, well you can guess what could happen! Truth is, “If you can't hold the gold, you don't own the gold”.

Along with the rising price of gold comes the big corporate mining companies grabbing thousands of acres in mining claims to “sit on them”. Virtually locking the little guy out of getting their own claims. It's advisable that if you can file mineral claims, even for small “recreational” amounts of gold, it should be done more sooner than later, while you still have a chance to find something available.

I enjoy the “hunt”, be it placer or hard rock. I do both. In the world of ever controlling governments banning or limiting small dredge operations it is getting harder and harder to find those virgin river “glory holes” laden with the heavy yellow metal. What many forget to ask themselves is “where did the gold in the rivers come from?” The answer is normally “from above”. Veins and outcrops poke through, and eventually wear due to heat expansion and freezing water in the cracks eventually breaking up the quartz matrix and releasing the gold. That gold eventually washes down hill until it gets to a river where it slowly wears down and becomes lodged in a depression on the river bottom. I am sure there are tons to find, “if” one could actually dredge down to bedrock!

Over the past 150 years or so, the rivers have been so picked, and the surrounding hills have not had a chance to replenish the gold in the rivers. It could take a thousand years! You probably will not be around then, so the next best thing is to study up and look for “float gold”. That is, gold, probably still within its host of quartz, laying on the side of some hill. It broke from the outcrop and is on its' long journey downhill. The skill comes in by tracing the float back to the original source. The float gold will act like a pyramid, as you will find pieces closer together the further up the hill you go.

If you are lucky enough to find the source, and it has not fully decomposed yet, that outcrop poking through could lead to a very large and deep vein! SAMPLE... SAMPLE... SAMPLE....

Regardless of the method you use to sample the quartz, you will have to crush it down to a LEAST 100 mesh, and 200 to 300 would be even better. Like the old riddle “What's black and white and red all over?” Well is just might be some valuable ore! What's more, that quartz can also hold values in Silver ore, any of the Platinum group, and even copper, lead, zinc or any rare earth minerals. It's also said that the richest ores per ton contains the finest free-milling gold particulates!

It's far better to learn how to do simple field tests on crushed ores and know for a fact if it is worth paying for an assay to be done, than to blindly pay for dozens of assays that may turn out to be not worth the time or effort. But if you do find something promising, it's worth having a professional assay done and a claim filed.

If you are lucky enough to find a viable outcrop, you will have a few options after your claim is filed. (you will be filing a lode claim, not a placer claim). You can work what you can, going for the most valuable ore, the high grade stuff which will allow you to buy more and bigger tools to get in there, or you can sell or lease the claim to a company with the tools to do the job, but they will want to take a lot of core samples to see if it's worth the time and monetary expenditures.

To get started, and assuming your find is in a very remote area, it's advisable to have a utility quad to get to the area. You will need to haul in a small generator, an electric demolition hammer, and an impact mill. You can then run the hammer and quickly and easily break up the decomposing quartz to a size that will fit in the impact mill that will pulverize the rock quickly. Once that's accomplished, it's a matter of figuring out what you want to get out of your powdered ore and the best way to process it. There are dozens and dozens of ways, pending on what is in the powdered ores. Hopefully you will make enough to put in a road to your claim soon.

The Gold Cube will catch fine gold in the 100 mesh and finer in its vortex matting. Crushing to 100 mesh and finer with an impact mill will allow the prospector to run the powder through a Gold Cube

and after running a ton of rock, you will take home a cup of cons!

We think the Crazycrusher is just the tool to do the sampling with. Starting with a piece of ore the size of a chicken egg, with just a few passes you can reduce it to 100 mesh and finer, as fine as you want to take it down to with additional passes. At only 34 pounds, it's quite portable. No gas, no electricity. The ultimate in green technology and a must have when off the grid.

Sure, a pipe in a pipe, or a pestle and mortar works, but once some of the rock is turned to sand, well have you ever tried breaking a rock with a hammer when it's sitting on sand? Doesn't work too well.

Happy hunting!

Gary

Read more…

Where you should look and try to find gold

Where to look to find gold

You will find gold in different spot in streams. Water is the primary agent in the creation of most placer deposits. Moving water can contain huge amounts of sentiment materials, by way of fine silt to large river rocks, especially in the course of run-off time periods. When freed from the particular mountain by means of weathering, gold is usually added to stream waters along with rock debris, and it is moved down by way of the stream. Where streams meander you can find gold, if it goes over falls you can find gold, or are deflected around rocks is good place to find gold, if a drop in water velocity takes place you can often times find gold, and the gold drops out there. Extended agitation by way of water causes gold to settle all the way down through the gravel right up until reaching bedrock or an impenetrable clay layer that is where you find gold nuggets. These concentrations are known as pay streaks that would be nice to find gold pay streaks.

Best chances to find gold

find goldThe best locations to uncover gold exist wherever turbulence change to slower-moving waters flow. Check out slower moving water down below rapids and waterfalls, deepened pools, and the downstream section involving big chunks of rock. On the inside turns of meanders, upstream ends with fine sand as well as 'point" bars are good locations for you to pan fine gold, which can be replaced each year during runoff. Bedrock crevices or pockets acting as natural riffles can accumulate gold. Scoop out there and pan material from these places. Spring, very early summer months, and just before freeze within the fall are wonderful points during the year to go panning. Water is low and gold-bearing rock is exposed which makes it easier to find gold. To lessen resource damage, restrict excavating to active, unvegetated stream gravels.

Tools you will need to find gold

The basic equipment is quite simple and requires only a minimum investment. A gold pan is most important. Metal pans were used by early prospectors; modem versions are plastic with built-in riffles. In a pinch, frying pans and even hub caps will work. New metal pans generally come with a coating of grease and should be cleaned thoroughly by heating over an open fire. The pan will rust, but some rust is beneficial for collecting fine gold and help find gold.

Suggested equipment to find gold.

  • gold pan (plastic with riffles or metal); 14" size is best.
  • shovel to loosen gravel from creek bottom.
  • grizzly pan with 1/2-inch holes in bottom; this pan helps separate coarse gravel, speeding up the panning process.
  • magnifying lens (at least 10X power) to identify minerals.
  • sluice box, approximately 3 feet long; (construct or obtain commercially; aluminum version is available.)
  • tweezers for picking up gold; a dry finger will also work.
  • small magnet for separating out magnetic black sands.
  • small glass vials to hold gold.
  • rubber gloves to protect hands from cold water.
  • rubber boots to keep feet dry while wading in creeks.

Good luck on you next trip to find gold it will pay off some day.

More at http://prospectminingforgold.com

Read more…

Amateur prospectors

15957125_BG1.JPGLas Vegas residents are striking it rich, and it's happening nowhere near a casino. Amateur prospectors are using the desert to find a gold mine.

The southwest is a place where brush and cactus rule the land, but there is something else that brings people to the barren land.

It is a place that is so valuable, that we were asked to keep the exact location a secret.

"I live, breathe, and prospect," said former Las Vegas resident Doug Parker.

Gold prospecting is an activity that hearkens back to the old days of the gold rush. Today, it is alive and well,      miles from the Vegas strip.

"I took over for my father, learned (prospecting) from him, and taught it to my kids," Parker said.

He has done the 9-5 job, working as a slot take at the Flamingo for 25 years. Now, Parker and his friends are looking for a new kind of jackpot.

"We don't like to gamble, but we like to do this," said prospector Lorna Caldwell.

"There's gold out here all over the place," Parker noted.

The gold is found in small flakes, and believe it or not - large nuggets.

Watch the video and rest of the story at http://prospectminingforgold.com/new-prospectors-gold-prospecting-survives thanks for reading.

Read more…