GS its all just standard size material from any steel supply yard the rest is just grinding cutting and welding and yes hand made tips and hardened with a torch
OK I see it now probale should have read the head line lol. Some of them bolts with the raised trangle on the head have a Shear stranth of up to 3000 lbs, Great Job Howard
Those are great do you smak them with a Hammer, I got one of them 40lb Breaker Bars never thought to use it way to big ha. I gess the top bar Buts up to the bottom bar or does the bolt take the beating ?
Comments
GS its all just standard size material from any steel supply yard the rest is just grinding cutting and welding and yes hand made tips and hardened with a torch
Howard where did you get the rods, did you make the tip as well?
Howard I made one, but it works the other way so if I need a pry bar I have one and it works good got that plain off a gpaa show.
When using these Dennis all energy goes straight to the tool almost feels like a dead blow hammer so very little wasted energy !
They have to be built reversely to work underwater
That's the Stuff Howard!!.. I always say "If I cant get to the bottom of the crack or crevice, I Will bring it to ME!!"
The top bars slide up and down in the tubes Dennis its 1 1/8 rod and quite heavy no hammer needed
Those are great do you smak them with a Hammer, I got one of them 40lb Breaker Bars never thought to use it way to big ha. I gess the top bar Buts up to the bottom bar or does the bolt take the beating ?