Hello everyone,
I had flat pan as project construction.
I went on two concepts
a totally flat pan
and a more classic flat pan with a depth of 4.5 cm.
the 2 pans, therefore thus drawings and 2 sets of own tools for each form
the tool in the foreground with a 15 ° angled base to accommodate special drill for the riffles of the pan flat flat
all with the machine to the pan and conventional flat on work surface
The molds or counter molds are made with MDF or medium is the compressed wood powder and pasted the only flaw is that it tends from dust as it is not stabilized with a special varnish.
I'm out because it generates a lot of dust
from the drawings here are the 2 modules
who received a stabilizing layer before the first sanding
details of 2 gold pans
the flat one
and the classic flat pan
I will remove the border and it will ready for molding
now it must be sanded, varnished, sanded and varnished again until an glossy and shinning condition.
then switch over molding and manufacture of gold pans+
the molds are sanded, and varnish 3times and 2 layers of wax on it
and ready for molding
next for the finished tools
here on the same photo I (with the hat) am using the flat one and my friend is using the classical one
here is the flat one and you can see a flake on the right side middle of the center
with our association, every year , we have our trophy so here is the link of some photos of the events
it is a competition day very funny and interesting day
Voila next time
Yann
Comments